How to maintain the Bluetooth helmet of daily motorcycle

How to maintain the Bluetooth helmet of daily motorcycle:

1、 After riding, motorcycle friends will find the bodies of various insects attached to the surface of the helmet. After praying for them! Some rub friends like to pick directly with their fingernails. In fact, this is wrong. Since the body of the insect has already been dried and hardened, if you pull it with brute force, it is easy to flower the mirror and damage the paint water on the surface of the helmet! Correct practice: dip cotton cloth in some warm water and soak it for half an hour first; Or use wet tissue paper! After half an hour, wipe it again with a clean cotton cloth, and you will find that the dead insects can be wiped off easily! After wiping, it is good to wax the helmet, which can protect the paint water of the helmet paint surface; Make the helmet look new! 2、 Lens motorcycle Bluetooth helmet lens is the window for motorcycle friends to look at nature! Only by ensuring that the windows are clean and bright can we see more clearly and further! Helmet lenses are covered with all kinds of small insects. Some motorcycle friends like to wipe them directly with car wiping cloth. In this way, the lenses are easy to be scratched and the visibility is reduced in the long run! Correct practice: take off the lens, wash it with clean water, and wipe the lens with clean cotton cloth while flushing, so as to ensure that every corner is not missed! Clear water has a certain lubricating effect, so the lens surface will not be scratched! If you encounter naughty insects and don't want to come down, you can wash and wipe them repeatedly. Don't pick them with hard objects!

3、 The helmet liner once helped a motorcycle friend take the helmet. I accidentally saw that the motorcycle friend's helmet liner was shiny with oil! The smell of oil and sweat is so hot that I don't know how he can stand it The inner liner of the motorcycle Bluetooth helmet is detachable. After a period of time, it should be removed for cleaning. When you remove the inner liner, you will find that all kinds of insect bodies and sand in it are actually waiting on your head every day, and the vent has already been blocked! If it is not cleaned for a long time, bacteria will breed; Give off a bad smell! Correct approach: generally insist on cleaning the inner liner of the helmet once a week, especially in summer, it is easy to sweat. After a long time, the sour taste in the helmet is unacceptable! Ventilation effect is also greatly reduced! In fact, just like washing clothes, take out the lining and wash it normally! If it is inconvenient for Mo you to go out, you can also buy a bottle of detergent online. Although the effect is not as clean and thorough as washing with water, it is always better than not washing!

4、 It's normal to encounter windy weather during the lens snap rub journey. After the wind and sand, you will find that when you lift or put down the helmet lens, it's not as smooth as before, accompanied by a click sound; I feel there is foreign matter in the buckle! The function of the buckle is to ensure the tightness between the lens and the helmet. If sand and stone are involved, it will not only wear the lens, but also reduce the tightness and fog the lens! Correct practice: regularly check the lens buckle, clean the sand between the buckles with a brush, and drip two drops of lubricating oil to keep the buckle smooth!

If your motorcycle Bluetooth helmet is not well sealed, it is easy to fog! Xiaobian has a trick to share with you: 1. First wash the helmet lens with clean water and dry it; 2. On the face side of the lens, apply a thin layer of detergent (the kind used for washing dishes in the kitchen) and let it dry naturally; 3. After cleaning and drying, wipe the lens with paper towel or cotton cloth and wipe off the residual detergent mark; 4. When you're done, take a few breaths on the lens to see if there's fog.